STAYS PUT.
Smooth surface: the suction base locks it to the floor. Rough surface: its own weight, close to 5 kg, keeps it down. Drive into resistance and 4.2 N·m pushes through — it doesn't lurch back across the room.
Hands-free, relentless, exactly the pace you set. FRAME 01 keeps that pace and doesn’t tire — steadier and deeper than a hand, for as long as you want it.
Aluminum-framed and suction-anchored so it stays put, quiet enough that the next room stays none the wiser. Remote only. No app.
Press the suction base onto a smooth, flat surface — tile, a headboard panel, a hard floor. Push the lever down to lock the seal before you load any weight on it.
Snap an attachment onto the Quick Connector until it clicks. Using a 3XLR attachment instead? Seat the included adapter first, then the attachment.
Start at the lowest mode on the remote and bring the speed up from there. Set the stroke length where it sits comfortably, then lean in — the frame is built to be leaned on.
Attachments are TPE: wash with warm water and an antibacterial toy cleaner before first use and after every session. Water-based lube only — silicone lube degrades TPE.
Wipe the machine and remote with a damp cloth; never submerge the motor housing. Detach the attachment and store it dry, out of direct sunlight.
Smooth surface: the suction base locks it to the floor. Rough surface: its own weight, close to 5 kg, keeps it down. Drive into resistance and 4.2 N·m pushes through — it doesn't lurch back across the room.
Measured at ear distance, not from across the room. Under 40 dB at normal speed — it drops into the background and you forget it's running. Flat out, still under 50. (The blips over 50 in the clip are the meter's own button, not the machine.)
Speed and stroke from across the room. No app, no account, no Bluetooth dropping mid-session — just a remote that does what you press.
Push-fit Quick Connector — attachments click on in a second, off just as fast. A Quick-Connector→3XLR adapter is in the box, so 3XLR attachments work too.
The most compact machine in the line — 25.5 cm long, about 5 kg. Lives on a closet shelf, packs into a bag, sets up on a nightstand in seconds. Small body, full torque.
A 2.76-inch stroke (7 cm) driven at 4.2 N·m — real reach and the power to push it through, not a token wiggle. Run it short and quick over the most nerve-dense zone (the outer third of the vaginal wall — Li et al., PLOS One, 2014 — the prostate, the rim), or open it to the full 7 cm for depth. You set it, every time.
TPE comes standard. Want non-porous, boilable silicone? The suction converter opens FRAME 01 to any suction-cup silicone you like — your shape, your size, your material. Both meet ISO 3533, the international safety standard for sex toys.
Under 50 dB measured 50 cm away — about the distance from the machine to your ear in use. That's a quiet room, not a power tool. The noise test video on this page is unedited; hear it yourself.
No. Everything runs off the wireless remote — speed, stroke, the 21 modes. No app to install, no account, no Bluetooth pairing that drops mid-session.
Native mount is a push-fit Quick Connector — click on, click off — with a Quick-Connector→3XLR adapter in the box, so 3XLR attachments work too. Want to run your own? We won’t promise Vac-U-Lock: that plug works loose under real thrust, so it’s not a mount we’ll stand behind. If you’ve got a suction-cup dildo, add the suction converter (sold separately) and try it — your call, no guarantee.
A suction base. Press it onto any smooth, flat surface — tile, a hard floor, a headboard panel — and lock the lever. With 4.2 N·m of torque it holds without walking.
The machine, the wireless remote, two standard attachments (a TPE dildo and the Quick-Connector→3XLR adapter), the power supply, and a manual. Extra attachments and the suction converter are sold separately.
TPE, 19 cm total length, 13.3 cm insertable, 3.5 cm across. Water-based lube only — silicone lube degrades TPE.
Standard attachments are body-safe TPE — soft and skin-friendly. TPE is porous, so keep it to water-based lube and wash it before and after every run (silicone lube degrades it). Want non-porous? The suction converter in the kits mounts your own silicone.
Yes — it’s built for it. The real question with anal is whether the machine has the torque to push in against resistance and hold the pace instead of stalling or backing off — 4.2 N·m does. Start short and slow, lube heavy (water-based only — silicone eats the TPE), and ease in at your own pace on the remote. Once you’ve opened up it runs hands-free, steadier and deeper than any hand.
Stroke rate is how fast it moves; torque is whether it keeps moving when you push back. A big number on a light motor drops the moment it meets resistance. FRAME 01 runs 292 a minute on 4.2 N·m and holds that pace under load instead of spinning free. Steady beats fast.
Plain mailer, no brand on the outside, no product name on the label. Nothing on the box says what's inside.
One year of replacement coverage — if it fails in that window, we send a new one, not a repair. Returns inside the window are on the page's trust line.
The standard dildo is body-safe TPE — soft and skin-friendly, and it meets ISO 3533, the international safety standard for sex toys. TPE is porous, so keep it to water-based lube and wash it before and after every run (silicone lube degrades it; a condom makes cleanup easy). Want non-porous and boilable? Run your own silicone dildo on the suction converter (sold separately).
My last machine sounded like a drill through the wall. This one runs with people home and nobody notices.
DISCIPLAY contains adult content and products intended for adults only. By entering you confirm you are at least 18 years of age.